 | Hardware Sentry KM for PATROL v1.6.01 |
 | Release Notes for v1.6.01 |
| Getting Started |
| Customer Support |
| Supported Platforms & Requirements |
| Integrating Hardware Sentry |
| Inside Hardware Sentry |
| The Connectors |
| The Detection Process |
| The Discovery Process |
| The Collection Process |
| Installing Hardware Sentry |
| Migrating from Previous Versions |
| Packages |
| Licensing |
| Trial Period |
| Targeted Computers |
| Setting up Hardware Sentry |
| License Keys |
| Getting the BMC Software Installation Utility |
| Installation Procedure |
| Extracting the Setup Files |
| Preloading Hardware Sentry |
| Tuning the PATROL Agent |
| Uninstalling Hardware Sentry |
| Monitoring with Hardware Sentry |
| The Basics |
| Automatic Detection - No Configuration |
| Hardware Sentry Menu Commands |
| KM Commands for the Managed System's Settings |
| KM Commands for the Monitored Devices |
| Critical Device Monitoring |
| Monitoring Memory Module |
| Monitoring Processor |
| Network and Fiber Ports Monitoring |
| Environment Monitoring |
| Monitoring Fan |
| Monitoring Power Supply |
| Monitoring Temperature |
| Monitoring Voltage |
| Disk Monitoring |
| Monitoring Disk Controller |
| Monitoring Physical Disk |
| Monitoring Logical Disk |
| Connector Monitoring |
| Monitoring a Remote System or an External Device |
| Typical Scenarios of Remote Monitoring |
| Reporting the Space Available in a Disk Array |
| Reporting Electricity Consumption |
| Reporting Data Traffic on a Fiber Switch in a SAN |
| How to Locate a Device in a System |
| Missing Device Detection |
| Thresholds, Alerts and Notifications |
| Threshold Mechanism Selection |
| Modify Alert Thresholds |
| Network Link Alerts |
| Tune Threshold Tolerance |
| Alert after N Times |
| Alert Actions |
| Edit Alert Actions |
| Alert Actions Macro Variables |
| Internal KM Issues Notification |
| Intrusion Detection Alerts |
| Unknown Status Management |
| Basic Configuration and Administrative Tasks |
| KM Commands for KM Settings |
| Connection, Credentials and Connectors on Local Host |
| Customize the Discovery Cycle |
| Show Instant Hardware Health Report |
| Customize the Polling Interval |
| Java Settings |
| Pause/Resume Monitoring |
| Reinitialize the KM |
| Restore Device Monitoring |
| Terminate the Monitoring of a Device |
| UNIX Console Mode |
| Trigger a KM Discovery |
| Automatic ErrorCount Reset |
| Reporting |
| Hardware Inventory Report |
| Schedule Hardware Inventory Reports |
| Ethernet/Fiber Port Traffic Report |
| Energy Usage Report |
| Troubleshooting |
| Enabling the Debug Mode |
| Hardware Sentry shows nothing |
| Monitors nothing other than network interfaces |
| Note about SNMP on Windows Server 2003, 2008 |
| Unable to see any disk information |
| Reference |
| Classes and Parameters |
| MS_HW_BATTERY |
| MS_HW_BATTERY_CONT |
| MS_HW_BLADE |
| MS_HW_CAPACITYREPORT |
| MS_HW_BLADE_CONT |
| MS_HW_CONNECTOR |
| MS_HW_CONNECTOR_CONT |
| MS_HW_CPU |
| MS_HW_CPU_CONT |
| MS_HW_CPUCORE |
| MS_HW_CPUCORE_CONT |
| HS HW ENCLOSURE |
| MS_HW_DISKCONTROLLER |
| MS_HW_DISKENCLOSURE |
| MS_HW_FAN |
| MS_HW_FAN_CONT |
| HS_HW_LED |
| MS_HW_LED_CONT |
| MS_HW_LOGICALDISK |
| MS_HW_LOGICALDISK_CONT |
| MS_HW_MAIN |
| MS_HW_MEMORY |
| MS_HW_MEMORY_CONT |
| MS_HW_NETWORK |
| MS_HW_NETWORK_CONT |
| MS_HW_OTHERDEVICE |
| MS_HW_OTHERDEVICE_CONT |
| MS_HW_PHYSICALDISK |
| MS_HW_PHYSICALDISK_CONT |
| MS_HW_POWERSUPPLY |
| MS_HW_POWERSUPPLY_CONT |
| MS_HW_ROBOTICS |
| MS_HW_ROBOTICS_CONT |
| MS_HW_TAPEDRIVE |
| MS_HW_TAPEDRIVE_CONT |
| MS_HW_TEMPERATURE |
| MS_HW_TEMPERATURE_CONT |
| MS_HW_VOLTAGE |
| MS_HW_VOLTAGE_CONT |
| Connectors and Platforms |
| Connectors & Platforms Reference Table |
| Cisco UCS Manager (Blade, Fabric Interconnect Switch) |
| IPMI |
| Adaptec IOManager |
| Adaptec Storage Manager (DPT) |
| Adaptec Storage Manager Web Edition (AAC) |
| Cisco MDS9000 Series - SSH/Telnet |
| DataDirect Networks (DDN) Disk Array - SNMP Agent |
| Dell OpenManage Array Manager |
| Dell DRAC/MC (Dell Remote Access Controller/Modular Chassis) |
| Dell CMC (Dell Chassis Management Controller) |
| Dell OpenManage Server Administrator |
| Dell OpenManage Storage Manager |
| Fibre Alliance SNMP Agent (Switches) |
| Fujitsu-Siemens Management Blade (FSC BX Blade Servers) |
| Fujitsu-Siemens ServerView RAID Agent |
| Fujitsu-Siemens Serverview |
| HP BladeSystem |
| HP BladeSystem - Telnet/SSH |
| HP Insight Management Agent - Drive Array |
| HP Insight Management Agent- Fiber Array |
| HP Insight Management Agent - HBA |
| HP Insight Managerment Agent - IDE Storage |
| HP Insight Management Agent - iLO |
| HP Insight Management Agent - SCSI Storage |
| HP Insight Management Agent - Server |
| HP Insight Management Agent - Server (Alpha) |
| HP Insight Management Agent - Server - WMI |
| HP MP/GSP card (iLO) |
| HP TopTools Agent |
| HP TopTools NetRaid Agent |
| HP-UX - Common |
| HP-UX - Disks |
| HP-UX - Network |
| HP-UX - SASMGR Managed Disks |
| HP-UX-STM |
| IBM BladeCenter Management Module |
| IBM AIX - CHRP Environment |
| IBM AIX - Common |
| IBM AIX - Environment |
| IBM AIX - HBA |
| IBM AIX - SCSI disks |
| IBM Director Agent 3.x - Windows |
| IBM Director Agent 4.x - Linux |
| IBM Director Agent 4.x - Windows |
| IBM Director Agent 5.10x - Linux |
| IBM Director Agent 5.10x - Windows |
| IBM Director Agent 5.20.x - Linux |
| IBM Director Agent 5.20.x - ServeRAID - Linux |
| IBM Director Agent 5.20.x - Windows |
| IBM Director Agent 5.20.x - ServeRAID - Windows |
| IBM DS (LSI) Disk Arrays (smcli) |
| IBM Netfinity Manager 5.20.x - Basic |
| IBM Netfinity Manager 5.20.x - Disks |
| IBM Netfinity Manager 5.20.x - Normal |
| IPMI - In-band (IpmiTool) |
| LSI 1030-based GAM Server |
| LSI 1030-based GAM Server (Alternate MIB) |
| LSI Logic LsiUtil |
| LSI Logic - LsiUtil - RAID (Windows) |
| LSI Logic MegaRAID PowerConsole |
| LsiLogic MegaRAID SAS |
| LsiLogic MegaRAID SAS (Newer Controllers) |
| LSI/Mylex GAM Server |
| Linux - Network |
| MIB-2 Standard SNMP Agent - Network Interfaces |
| MIB-2 Standard SNMP Agent - Network Interfaces - Linux |
| MIB-2 Standard SNMP Agent - Network Interfaces - Windows |
| MIB-2 Standard SNMP Agent - Network Interfaces - Solaris |
| Motherboard Monitor |
| NetApp Filer - SNMP Agent |
| NEC ESMPRO Agent |
| Promise FastTrack |
| Quantum (ADIC) Based Tape Libraries |
| SmartMonTools |
| SMI-S Compliant Disk Arrays |
| SMI-S Compliant HBAs |
| SMI-S Compliant Storage Libraries |
| SMI-S Compliant SAN Switches |
| SNIA Compliant Tape Libraries |
| StorageTek LSeries Tape Library |
| StorageTek StreamLine Tape Library |
| Sun Advanced Lights-Out Management (ALOM) card |
| SUN Blade Chassis |
| Sun Fire F12K/F15K/F20K/F25K (SMS) |
| Sun Fire Mx000 (XSCF) |
| SUN ILOM (SNMP) |
| SUN ILOM (SSH) |
| Sun Solaris - Environment (ALOM-CMT snapshot) |
| Sun Solaris - Environment (prtpicl) |
| Sun Solaris - Environment (prtdiag, lom) |
| Sun Solaris - Fault Manager (Memory) |
| Sun Solaris - Memory modules |
| Sun Solaris - Network |
| Sun Solaris - Non-Sun Disks |
| Sun Solaris - Processors (psrinfo) |
| Sun Solaris - RAID Disks (Raidctl) |
| Sun Solaris - SPARC T1/T2 Processors (psrinfo) |
| Sun Solaris - Sun Disks |
| Sun Solaris - Tape Drives |
| VMware ESXi |
| VMware ESX4i |
| VMware ESX4i - Disks (IPMI) |
| VMware ESX4i - Disks (VMware) |
| WMI - Network |
| WMI - Battery |
| WMI - Disks |
| WMI - Network |
| Configuration Variables |
| Host-Specific Configuration Variables |
| Macros |
| Monitoring Hardware on Specific Platform with Hardware Sentry |
| Hardware Sentry on Dell™ PowerEdge Servers |
| About Dell™ PowerEdge Servers |
| Hardware Instrumentation |
| Setting up Hardware Sentry on Dell™ PowerEdge Servers |
| Discovered Components and Monitored Parameters |
| Troubleshooting |
| Hardware Sentry on Dell™ Blade Servers |
| About DELL Blade Servers |
| Hardware instrumentation |
| Setting up Hardware Sentry on Dell™ Blade Servers |
| Discovered components and monitored parameters |
| Troubleshooting |
| Hardware Sentry on IBM© xSeries Servers |
| About IBM® xSeries Servers |
| Hardware Instrumentation |
| Supported Configurations |
| Setting up Hardware Sentry on IBM® xSeries Servers |
| Discovered Components and Monitored Parameters |
| Troubleshooting |
| Hardware Sentry on IBM© BladeCenter Systems |
| About IBM BladeCenter |
| Hardware Instrumentation |
| Setting up Hardware Sentry on IBM BladeCenter |
| Discovered components and monitored parameters |
| Troubleshooting |
| Hardware Sentry on Sun™ Servers |
| Hardware Sentry on Sun™ Solaris Systems (sun4u) |
| About Sun Solaris systems (sun4u) |
| Hardware Instrumentation |
| Setting up Hardware Sentry on Sun Solaris servers (sun4u) |
| Discovered components and monitored parameters |
| Troubleshooting |
| Hardware Sentry on Sun™ SPARC T1 and T2 systems (sun4v) |
| About Sun SPARC T1 and T2 systems (sun4v) |
| Hardware Instrumentation |
| Setting up Hardware Sentry on Sun Solaris servers (sun4v with Sun Explorer) |
| Discovered components and monitored parameters |
| Troubleshooting |
| Setting up Hardware Sentry on Sun Solaris servers (sun4v with ALOM) |
| Discovered components and monitored parameters |
| Troubleshooting |
| Hardware Sentry on Sun™ X86 and X64 Systems |
| About Sun X64 systems |
| Hardware Instrumentation |
| Setting up Hardware Sentry on Sun X64 servers (i86pc) running Solaris |
| Discovered components and monitored parameters |
| Troubleshooting |
| Setting up Hardware Sentry on Sun X64 servers running Linux |
| Discovered components and monitored parameters |
| Troubleshooting |
| Hardware Sentry on Sun™ Fire F12K, F15K, E20K and E25K Servers |
| About Sun Fire F12K, F15K, E20K and E25K servers |
| Hardware Instrumentation |
| Setting up Hardware Sentry on Sun Fire F12K, F15K, E20K and E25K (on the SC) |
| Discovered components and monitored parameters |
| Troubleshooting |
| Setting up Hardware Sentry on Sun Fire F12K, F15K, E20K and E25K (remotely) |
| Discovered components and monitored parameters |
| Troubleshooting |
| Hardware Sentry on Sun™ Fire M4000, M5000, M8000 and M9000 Servers |
| About Sun Fire Mx000 servers |
| Hardware instrumentation |
| Setting up Hardware Sentry on Sun Fire Mx000 |
| Discovered components and monitored parameters |
| Troubleshooting |
| Hardware Sentry on HP ProLiant Servers |
| About HP ProLiant Servers |
| Hardware Instrumentation |
| Setting up Hardware Sentry on HP ProLiant Servers |
| Discovered Components and Monitored Parameters |
| Troubleshooting |
| Hardware Sentry on IBM© IAX Servers |
| About IBM IAX Servers |
| Hardware instrumentation |
| Setting up Hardware Sentry on IBM AIX servers |
| Discovered components and monitored parameters |
| Troubleshooting |
© 2010 Sentry Software