Adding BPM Express for Hardware to an Element Profile

1.Click Configure tab > Element Profiles. The Available Profiles page appears. Select the Profile to which you wish to add the Hardware class > Edit.

ADD_Class_Element_Profile_Edit

Selecting a Profile

2.The selected Element Profile’s Properties page appears. Go to Application Classes > Add.

ADD_Class_Element_Profile_Add

Adding Application Classes

3.The Element Profile Properties – Add Application Classes page appears. Choose Hardware from the Select Category drop-down list.

ADD_Class_Element_Profile_Select

Selecting the Hardware Applicable Class

4.On selection of Hardware in the list, the Available Classes section displays all the different platform-specific BPM Express for Hardware application classes: Hardware (Solaris), Hardware (Linux), Hardware (AIX), etc.

5.Select the application class applicable to your system and click Next.

6.On the Properties and Credentials page, enter the information required for monitoring with Hardware (Windows/ Aix,HP-UX, Linux, Solaris and Tru64 systems/Other:Blade chassis, management cards etc.)

7.After entering the element properties and credentials, you arrive at the final step for adding the BPM Express for Hardware application class: Thresholds, Properties and Credentials.

8.Thresholds are automatically set by BPM Express for Hardware. It is recommended to keep the default thresholds (or see Modifying Parameter Thresholds. Click Finish.

9.Hardware (<platform type>) appears in the list of Application Classes for the profile.

ADD_Class_Element_Profile_Profile

Element Profile Properties

10.Click Done to save the changes made. The BPM Express for Hardware application class is now added to all the elements in the selected Element Profile.