Sun Solaris–Environment (ALOM-CMT snapshot)

This connector provides environmental and disk information (temperatures, fans, etc.) on Sun SPARC T1/T2 servers equipped with an ALOM card. Gathers the hardware information from the ALOM card in-band (no telnet or SSH connection over the network). Requires the SUNWexplo (Sun Explorer) package.

Target

Typical platform: Sun Fire (SPARC T1/T2)

Operating system: Sun Solaris

Instrumentation layer: Sun Explorer and the ALOM-CMT card

Technology used: System commands

Discovered objects

•Physical disks (SEN_HW_PHYSICALDISK)

•Fans (SEN_HW_FAN)

•Voltage sensors (SEN_HW_VOLTAGE)

•Temperature sensors (SEN_HW_TEMPERATURE)

•Power supplies (SEN_HW_POWERSUPPLY)

•Other devices (SEN_HW_OTHERDEVICE)

•Enclosure model (SEN_HW_ENCLOSURE)

Parameters collected

•SEN_HW_PHYSICALDISK / Status

•SEN_HW_FAN / Status

•SEN_HW_FAN / Speed

•SEN_HW_VOLTAGE / Status

•SEN_HW_VOLTAGE / Voltage

•SEN_HW_TEMPERATURE / Status

•SEN_HW_TEMPERATURE / Temperature

•SEN_HW_POWERSUPPLY / Status

•SEN_HW_OTHERDEVICE / Status

This connector is able to monitor the local host and/or a remote system.

Credentials

This connector probably requires root privileges for its proper operation. You therefore will need to configure the product to use the root login/password to execute external commands.
Alternatively, you can configure the product to use the 'sudo' utility for the following commands: /opt/SUNWexplo/bin/snapshot.