Numeric Value Extraction

 Home  Previous  Next

Parameters

Name

Type

Description

Alert Conditions

Value (HB)

Numeric

Parameter displays the value extracted from the searched content.

Unit: General numbers

“No data” displayed indicates no numeric values matching the specified criteria are found. Possible causes are stated.

Activate the thresholds on this parameter if a higher count is desirable.

Alarm or Warning

Alarm

No default thresholds or alerts set

Value (LB)

Numeric

Parameter displays the value extracted from the searched content.

Unit: General numbers

“No data” displayed indicates no numeric values matching the specified criteria are found. Possible causes are stated.

Activate the thresholds on this parameter if a lower count is desirable.

Alarm or Warning

Alarm

No default thresholds or alerts set

Thresholds can be set and modified on all parameters.

Note(HB) = "Higher is Better" and (LB) = "Lower is Better". HB and LB parameters will always display the same value since, basically, both represent the same value. The purpose of having two parameters for the same value is to be able to set different alert thresholds depending on the nature of the monitored object. For instance, an alert can be set to be triggered on the HB parameter when the value dips too low (it breaches the lower threshold of the range) and an alert can be set on the LB parameter to go off when the value rises too high. The setting of alerts is flexible and can be done on either of the two parameters, on both, or on neither; it depends entirely on nature of the monitored object and the user's specific needs.