Knowledge Base

HDS SMI-S Provider: Getting Performance Metrics

Description

As illustrated below, USP V/VM and TagmaStore USP require a Device Manager Agent installed to get performance metrics; Hitachi AMS Series, TagmaStore AMS/WMS series, Thunder 9500V, and Thunder 9200 requires a Device Manager server.  High Command Device Manager 5.9 or higher can provide performance statistics.

While the HDS SMI-S Provider gives information on volume, port, and overall array performance metrics, Tuning Manager provides Disk and Controller performance metrics. Tuning Manager uses a proprietary API.

Enabling performance on 9580

To enable performance on 9580:

1. Start Storage Navigator
2. Change the operation mode to Management Mode
3. In the Settings›Configuration Settings menu, select the Performance tab
4. Select the Performance Statistics tab. 
5. Check all performance choices.

Related Topics

• HDS SMI-S Provider: Enabling SMI-S on Device Manager
• Hitachi Device Manager Running out of Memory
• Installing the Hitachi Device Manager Agent on Linux
• Leveraging the HSNM2 CLI to Monitor Hitachi (HDS) AMS, HUS Systems
• Monitoring Hitachi Disk Arrays
• Monitoring Hitachi HNAS Storage Devices with Monitoring Studio
• No data collected for HPE XP7/XP8 storage systems in TrueSight Capacity Optimization or TrueSight Operations Management
• Troubleshooting Issues Related to the Hitachi G-Series and HUS-VM Embedded SMI-S Providers