Monitoring EMC Atmos Storage Devices with Monitoring Studio
KB1193 - Apr 25, 2017
Type: Configuration Template
Description: How to monitor EMC Atmos storage devices with Monitoring Studio v9.2 and higher.
Additional Keywords: EMC, EMC Atmos
This article explains how to import the pre-built configuration into Monitoring Studio to monitor the capacity and performance of the EMC Atmos storage devices through SNMP. The Sentry Storage Analyzer for TrueSight OM license is required to use Monitoring Studio.
The pre-built configuration does not cover all the monitoring aspects of EMC Atmos storage devices. It is provided as an example and can be used as a working base for advanced monitoring. No support will be provided for this prebuilt configuration. Should you need further assistance to customize it, please contact our Professional Services team.
The pre-built configuration collects the following metrics:
Meta Data Service
Importing the Pre-Built Configuration
Before using the pre-built configuration, make sure that:
- the system running the PATROL Agent has access to the SNMP Agent embedded on the EMC Atmos storage device through SNMP v1/v2c/v3 and is configured to listen to the SNMP traps
- PATROL Agent 9.6 or later is installed and properly configured
- Monitoring Studio KM 9.2 or later is installed with the latest patches and loaded on the PATROL agent
- Download the EMC-Atmos-for-MSv9.x-v1.cfg file and copy it on the server where the PATROL Agent and the Monitoring Studio KM is installed.
- Right-click on the main Monitoring Studio icon > KM Commands > Configuration > Import Configuration
Importing the EMC Atmos pre-built configuration
- Navigate to the folder where the downloaded cfg file is copied and choose the EMC-Atmos-for-MSv9.x-v1.cfg
Selecting the EMC Atmos pre-built configuration to import
- Review the Import Summary and click Next.
Reviewing the EMC Atmos pre-built configuration import summary
- When import is complete, click Finish.
EMC Atmos pre-built configuration import complete
- In the PATROL Console, under the EMC ATMOS container, right-click the emc-atmos host and click Edit.
- Specify the hostname or IP address of the EMC Atmos storage device to be monitored and click Next.
Specifying the hostname or IP address of the EMC Atmos storage device to be monitored
- Specify the SNMP version used and click Next.
Selecting the version of the SNMP used
- For SNMP v1 and v2c, provide the SNMP community string; for SNMP v3 enter the credentials and click Next.
Configuring SNMP settings
- Click Finish to start the discovery.
Specifying the tests to perform to check host availability
To learn more about the monitor types used in this configuration template, please refer to the Specifying the Monitors Used section of the user documentation.
Please refer to Professional Services page to learn more about the consulting services available.