IBM Director Agent 5.20.x–Linux

This connector provides hardware monitoring through the IBM Director Agent version 5.20.x which supports some (not all) xSeries servers.

Target

Typical platforms: IBM xSeries, IBM Netfinity

Operating system: Linux

Instrumentation layer: IBM Director Agent 5.20.x

Technology used: WBEM

Discovered objects

●Disk controllers (SEN_HW_DISKCONTROLLER)

●Logical disks, RAIDs (SEN_HW_LOGICALDISK)

●Physical disks (SEN_HW_PHYSICALDISK)

●Fans (SEN_HW_FAN)

●Voltage sensors (SEN_HW_VOLTAGE)

●Temperature sensors (SEN_HW_TEMPERATURE)

●Power supplies (SEN_HW_POWERSUPPLY)

●Memory modules (SEN_HW_MEMORY)

●Processors (SEN_HW_CPU)

●Enclosure model (SEN_HW_ENCLOSURE)

Parameters collected

●SEN_HW_LOGICALDISK / Status

●SEN_HW_PHYSICALDISK / Status

●SEN_HW_FAN / Speed

●SEN_HW_VOLTAGE / Voltage

●SEN_HW_TEMPERATURE / Temperature

●SEN_HW_POWERSUPPLY / Status

●SEN_HW_MEMORY / Status

●SEN_HW_CPU / Status

●SEN_HW_ENCLOSURE / Intrusion Status

This connector is able to monitor the local host and/or a remote system.

Credentials required

This connector probably requires root privileges for its proper operation. You therefore will need to configure the product to use the root login/password to execute external commands. Alternatively, you can configure the product to use the sudo utility for the command: /opt/ibm/icc/cimom/bin/CLI.