IBM DS (LSI) Disk Arrays (smcli)

This connector provides hardware monitoring for IBM DS Storage Systems through the SMCli utility.

Target

Typical platform(s): IBM DSxxxx Disk Array

Operating system(s): Storage Device

Instrumentation layer: SMCLI

Technology used: System commands

Discovered objects

●Disk controllers (SEN_HW_DISKCONTROLLER)

●Logical disks, RAIDs (SEN_HW_LOGICALDISK)

●Physical disks (SEN_HW_PHYSICALDISK)

●Fans (SEN_HW_FAN)

●Temperature sensors (SEN_HW_TEMPERATURE)

●Power supplies (SEN_HW_POWERSUPPLY)

●Other devices (SEN_HW_OTHERDEVICE)

●Network cards (SEN_HW_NETWORK)

●Enclosure model (SEN_HW_ENCLOSURE)

●Batteries (SEN_HW_BATTERY)

Parameters collected

●SEN_HW_DISKCONTROLLER / Controller Status

●SEN_HW_LOGICALDISK / Status

●SEN_HW_PHYSICALDISK / Status

●SEN_HW_FAN / Status

●SEN_HW_TEMPERATURE / Status

●SEN_HW_POWERSUPPLY / Status

●SEN_HW_OTHERDEVICE / Status

●SEN_HW_NETWORK / Status

●SEN_HW_BATTERY / Status

●SEN_HW_NETWORK / Link Speed

This connector is able to monitor remote system only.

This connector probably requires root privileges for its proper operation. You therefore will need to configure the product to use the root login/password to execute external commands. Alternatively, you can configure the product to use the 'sudo' utility for the following commands:
   Second_Address

See Also

Platforms & Connectors