Back to the list of connectors

NetApp Filer (SNMP)

Connector file name: MS_HW_NetApp.hdf

Description

This connector discovers the enclosure and the disks of NetApp disk arrays (filer) as well as the various environment sensors (temperatures, fans, power supplies, etc.). It relies on the SNMP protocol.

Target

Typical platform: NetApp

Operating system: Storage System

Prerequisites

Relies on: NetApp SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The NetApp Filer (SNMP) connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.789.1.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • BIOS Version
  • Model
  • Serial Number
  • Type
  • Vendor
    Battery (MS_HW_BATTERY)
      • Status
      Fan (MS_HW_FAN)
      • Additional Information 1
      • Status
      Logical Disk, RAID (MS_HW_LOGICALDISK)
      • Logical Disk Type
      • RAID Level
      • Size
      • Inclusion in Total Logical Disk Size
      • Status
      • Unallocated Space
      Network Card, FC Port (MS_HW_NETWORK)
      • Bandwidth
      • Device Type
      • Model
      • Physical Address
      • Physical Address Type
      • Link Status
      • Status
      Physical Disk (MS_HW_PHYSICALDISK)
      • Additional Information 1
      • Additional Information 2
      • Serial Number
      • Size
      • Vendor
      • Predicted Failure
      • Status
      Power Supply (MS_HW_POWERSUPPLY)
      • Additional Information 1
      • Serial Number
      • Status
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Additional Information 1
      • Alarm Threshold
      • Warning Threshold
      • Status
      • Temperature