Back to the list of connectors

HP BladeSystem

Connector file name: MS_HW_HPBladeSystem.hdf

This connector is superseded by:

Description

This connector provides hardware monitoring for the HP BladeSystem racks through the HP Insight Management Agents.

Target

Typical platform: HP BladeSystem

Operating systems: Out-of-Band, Microsoft Windows, Linux, Oracle Solaris

Prerequisites

Relies on: HP iLO / HP Insight Management Agents

Technology and protocols: SNMP

Connector Activation Criteria

The HP BladeSystem connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.232.22.2.3.1.1.1.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • Additional Information 2
  • Model
  • Serial Number
  • Type
  • Vendor
  • Power Consumption
  • Status
Blade (MS_HW_BLADE)
  • Blade Model
  • Blade Name
  • Serial Number
  • Power State
  • Status
Fan (MS_HW_FAN)
  • Fan Type/Location
  • Status
Other Device (MS_HW_OTHERDEVICE)
  • Additional Label
  • Device Type
  • Status
Power Supply (MS_HW_POWERSUPPLY)
  • Power (Nominal)
  • Status
Temperature Sensor (MS_HW_TEMPERATURE)
  • Sensor Type/Location
  • Warning Threshold
  • Status
  • Temperature