Back to the list of connectors

IBM AIX - Common

Connector file name: MS_HW_IBMAIX.hdf

This connector is superseded by:

Description

Provides hardware status information (processors, memory modules, network interfaces) on IBM AIX systems.

Target

Typical platform: IBM POWER

Operating system: IBM AIX

Prerequisites

Relies on: IBM AIX system commands (lsdev, entstat, etc.)

Technology and protocols: System Commands

Connector Activation Criteria

The IBM AIX - Common connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • Operating System is IBM AIX
  • The command below succeeds on the monitored host
    • Command: /usr/bin/ls /usr/sbin/lsdev
    • Output contains: ^/usr/sbin/lsdev$ (regex)

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • BIOS Version
  • Model
  • Serial Number
  • Type
  • Vendor
  • Status
Processor (MS_HW_CPU)
  • Maximum Speed
  • Model
  • Status
Memory Module (MS_HW_MEMORY)
  • Additional Information 1
  • Serial Number
  • Size
  • Error Count
  • Status
Network Card, FC Port (MS_HW_NETWORK)
  • Additional Information 1
  • Bandwidth
  • Device Type
  • Model
  • Physical Address
  • Physical Address Type
  • Bandwidth Utilization
  • Duplex Mode
  • Error Percent
  • Link Speed
  • Link Status
  • Received Bytes Rate
  • Received Packets Rate
  • Status
  • Transmitted Bytes Rate
  • Transmitted Packets Rate