Back to the list of connectors

LSI MegaCli

Connector file name: MS_HW_LSIMegaCliWindows.hdf

This connector is superseded by:

Description

Gives physical disk and array status.

Target

Typical platform: Any system with LSI MegaCli

Operating system: Microsoft Windows

Prerequisites

Relies on: Windows system commands (MegaCli / CmdTool2)

Technology and protocols: System Commands

This connector is not available for remote hosts (it is applicable to the local host only).

Connector Activation Criteria

The LSI MegaCli connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • Operating System is Microsoft Windows
  • The command below succeeds on the monitored host
    • Command: MegaCli -v -NoLog
    • Output contains: Exit Code: 0x00 (regex)
  • The command below succeeds on the monitored host
    • Command: MegaCli -PDList -aALL -NoLog
    • Output contains: [Pp][Dd] [Tt]ype (regex)

Monitors

Object Type Discovered Properties Collected Parameters
Disk Controller (MS_HW_DISKCONTROLLER)
  • BIOS Version
  • Firmware Version
  • Model
  • Serial Number
  • Battery Status
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • Additional Information 1
  • RAID Level
  • Size
  • Status
Physical Disk (MS_HW_PHYSICALDISK)
  • Additional Information 1
  • Model
  • Size
  • Type
  • Status