Back to the list of connectors
Lenovo IMM (SNMP)
Connector file name: MS_HW_LenovoIMM.hdf
This connector supersedes:
Description
This connector provides hardware monitoring through Lenovo's IMM management card. The connector also usually works with the last generation of IBM xSeries servers (m5).
Target
Typical platform: Lenovo
Operating system: Out-of-Band
Prerequisites
Relies on: Lenovo IMM's SNMP Service
Technology and protocols: SNMP
Connector Activation Criteria
The Lenovo IMM (SNMP) connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:
- An SNMP Get-Next on the OID
1.3.6.1.4.1.2.3.51.3.1.5.20.1must return a value in the same subtree
Monitors
| Object Type | Discovered Properties | Collected Parameters |
|---|---|---|
| Enclosure (MS_HW_ENCLOSURE) |
|
|
| Disk Controller (MS_HW_DISKCONTROLLER) |
|
|
| Battery (MS_HW_BATTERY) |
|
|
| Processor (MS_HW_CPU) |
|
|
| Fan (MS_HW_FAN) |
|
|
| LED (MS_HW_LED) |
|
|
| Logical Disk, RAID (MS_HW_LOGICALDISK) |
|
|
| Memory Module (MS_HW_MEMORY) |
|
|
| Physical Disk (MS_HW_PHYSICALDISK) |
|
|
| Power Supply (MS_HW_POWERSUPPLY) |
|
|
| Temperature Sensor (MS_HW_TEMPERATURE) |
|
|
| Voltage Sensor (MS_HW_VOLTAGE) |
|
|