Back to the list of connectors

MIB-2 Standard SNMP Agent - Network Interfaces - Linux

Connector file name: MS_HW_MIB2Linux.hdf

This connector supersedes:

Description

This connector discovers the enclosure and Ethernet ports of a system equipped with an MIB-2 standard SNMP Agent.

Target

Typical platform: Any system with SNMP

Operating system: Linux

Prerequisites

Relies on: MIB-2 Standard SNMP Agent

Technology and protocols: SNMP

Connector Activation Criteria

The MIB-2 Standard SNMP Agent - Network Interfaces - Linux connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • An SNMP Get-Next on the OID 1.3.6.1.2.1.2.2.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Network Card, FC Port (MS_HW_NETWORK)
  • Device Type
  • Physical Address
  • Physical Address Type
  • Bandwidth Utilization
  • Error Percent
  • Link Speed
  • Link Status
  • Received Bytes Rate
  • Received Packets Rate
  • Status
  • Transmitted Bytes Rate
  • Transmitted Packets Rate