Back to the list of connectors

MacroSan Storage System (SNMP)

Connector file name: MS_HW_MacroSan.hdf

Description

This connector discovers the enclosure and the disks of MacroSan disk arrays as well as the various environment sensors (batteries, fans, power supplies). It relies on the SNMP protocol.

Target

Typical platform: MacroSan

Operating system: Storage System

Prerequisites

Relies on: MacroSan SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The MacroSan Storage System (SNMP) connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.35904.1.2.2.1.2.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Type
  • Vendor
    Battery (MS_HW_BATTERY)
      • Status
      Fan (MS_HW_FAN)
        • Status
        Logical Disk, RAID (MS_HW_LOGICALDISK)
        • Size
        • Status
        Other Device (MS_HW_OTHERDEVICE)
        • Device Type
        • Status
        Physical Disk (MS_HW_PHYSICALDISK)
        • Additional Information 1
        • Additional Information 2
        • Model
        • Size
        • Status
        Power Supply (MS_HW_POWERSUPPLY)
          • Status