Back to the list of connectors

Fujitsu-Siemens Serverview

Connector file name: MS_HW_ServerviewNT.hdf

This connector supersedes:

Description

This connector provides hardware monitoring through the Fujitsu-Siemens Serverview Agent which supports almost all Fujitsu-Siemens PRIMERGY servers.

Target

Typical platform: Fujitsu-Siemens PRIMERGY

Operating systems: Microsoft Windows, Linux

Prerequisites

Relies on: Fujitsu-Siemens Serveview Agent

Technology and protocols: SNMP

Connector Activation Criteria

The Fujitsu-Siemens Serverview connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.231.2.10.2 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Type
  • Vendor
  • Intrusion Status
Processor (MS_HW_CPU)
  • Additional Information 1
  • Maximum Speed
  • Model
  • Vendor
  • Status
Fan (MS_HW_FAN)
  • Additional Information 1
  • Fan Type/Location
  • Speed
  • Status
Memory Module (MS_HW_MEMORY)
  • Additional Information 1
  • Size
  • Type
  • Error Count
  • Status
Power Supply (MS_HW_POWERSUPPLY)
  • Power Supply Type
  • Status
Temperature Sensor (MS_HW_TEMPERATURE)
  • Alarm Threshold
  • Sensor Type/Location
  • Warning Threshold
  • Temperature
Voltage Sensor (MS_HW_VOLTAGE)
  • Lower Threshold
  • Upper Threshold
  • Voltage Type
  • Voltage