Back to the list of connectors

Oracle/Sun ILOM (SNMP)

Connector file name: MS_HW_SunILOMSNMP.hdf

This connector is superseded by:

This connector supersedes:

Description

This connector provides hardware monitoring for the Sun/Oracle Blade servers with ILOM cards via SNMP

Target

Typical platform: Oracle/Sun

Operating systems: Out-of-Band, Storage System, Network Device

Prerequisites

Relies on: Sun/Oracle ILOM SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Oracle/Sun ILOM (SNMP) connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • An SNMP Get on the OID 1.3.6.1.4.1.42.2.70.101.1.1.2.1.5.1 must return a non-empty value

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • Firmware Version
  • Model
  • Serial Number
  • Vendor
  • Status
Processor (MS_HW_CPU)
  • Additional Information 1
  • Status
Fan (MS_HW_FAN)
  • Additional Information 1
  • Alarm Threshold
  • Warning Threshold
  • Speed
  • Status
Memory Module (MS_HW_MEMORY)
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Size
  • Vendor
  • Status
Other Device (MS_HW_OTHERDEVICE)
  • Additional Information 1
  • Type
  • Status
Physical Disk (MS_HW_PHYSICALDISK)
  • Additional Information 1
  • Additional Information 2
  • Vendor
  • Status
Power Supply (MS_HW_POWERSUPPLY)
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Status
Temperature Sensor (MS_HW_TEMPERATURE)
  • Additional Information 1
  • Alarm Threshold
  • Warning Threshold
  • Status
  • Temperature
Voltage Sensor (MS_HW_VOLTAGE)
  • Additional Information 1
  • Lower Threshold
  • Upper Threshold
  • Status
  • Voltage