Back to the list of connectors

Cisco Ethernet Switch

Connector file name: MS_HW_CiscoEthernetSwitch.hdf

Description

This connector discovers the enclosure Cisco Ethernet switches as well as the various environment sensors (temperatures, fans, power supplies, etc.). It relies on the SNMP protocol.

Target

Typical platform: Cisco

Operating system: Network Device

Prerequisites

Relies on: Cisco SNMP Agent (ciscoMgmt)

Technology and protocols: SNMP

Connector Activation Criteria

The Cisco Ethernet Switch connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.9.9.13.1.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Serial Number
  • Type
  • Vendor
    Fan (MS_HW_FAN)
      • Status
      Power Supply (MS_HW_POWERSUPPLY)
        • Status
        Temperature Sensor (MS_HW_TEMPERATURE)
          • Status
          • Temperature
          Voltage Sensor (MS_HW_VOLTAGE)
            • Status
            • Voltage