Back to the list of connectors

HP Integrated Lights-Out Management Card - Network

Connector file name: MS_HW_CpqNICiLO.hdf

This connector supersedes:

Description

This connector discovers enclosures, Ethernet ports, Physical network port and aggregations through the HP Integrated Lights-Out Management Card. This connector requires an Agentless Management Service and in some cases, the System Management Assistant.

Target

Typical platform: HP ProLiant

Operating system: Out-of-Band

Prerequisites

Relies on: HP Integrated Lights-Out Management Card

Technology and protocols: SNMP

Connector Activation Criteria

The HP Integrated Lights-Out Management Card - Network connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.232.18.2.3.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Network Card, FC Port (MS_HW_NETWORK)
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Device Type
  • Logical Address
  • Logical Address Type
  • Model
  • Physical Address
  • Physical Address Type
  • Bandwidth Utilization
  • Duplex Mode
  • Error Percent
  • Link Speed
  • Link Status
  • Received Bytes Rate
  • Received Packets Rate
  • Status
  • Transmitted Bytes Rate
  • Transmitted Packets Rate