Description

This connector discovers the status of a NetApp E-Series Storage Array, including environment sensors (temperatures, fans, power supplies, etc.). Relies on NetApp SANtricity REST API

Target

Typical platform: NetApp E-Series

Operating system: Storage System

Prerequisites

Relies on:

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The NetApp E-Series connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

• The HTTP Request below to the managed host succeeds:
  • GET /devmgr/v2/storage-systems/1
  • The response body contains: netapp-e (regex)

  Monitors

  Object Type	Discovered Properties	Collected Parameters
  Enclosure (MS_HW_ENCLOSURE)	Additional Information 1 Additional Information 2 Model Serial Number Type Vendor	Status
  Disk Controller (MS_HW_DISKCONTROLLER)	Additional Information 1 Model Serial Number Type Vendor	Controller Status
  Battery (MS_HW_BATTERY)	Model Serial Number Type	Status
  Fan (MS_HW_FAN)		Status
  Logical Disk, RAID (MS_HW_LOGICALDISK)	RAID Level Size	Status
  Memory Module (MS_HW_MEMORY)	Model Serial Number Size Vendor	Status
  Network Card, FC Port (MS_HW_NETWORK)	Additional Information 1 Additional Information 2 Physical Address Physical Address Type	Link Speed Link Status Status
  Other Device (MS_HW_OTHERDEVICE)	Additional Information 1 Additional Information 2 Serial Number Type	Status
  Physical Disk (MS_HW_PHYSICALDISK)	Additional Information 1 Additional Information 2 Firmware Version Model Serial Number Size Vendor	Status
  Power Supply (MS_HW_POWERSUPPLY)	Additional Information 1 Additional Information 2 Serial Number	Status
  Temperature Sensor (MS_HW_TEMPERATURE)		Status