Back to the list of connectors

H3C UniServer R4000 Series - HBA (SNMP)

Description

This connector discovers the HBA Ports of an H3C Uniserver R4900 system using its out-of-band HDM2 (Hardware Device Management 2) interface. Requires HDM2

Connector file name: MS_HW_H3CUniserverHBA.hdf

Target

Typical platform: H3C Uniserver R4000 Series

Operating system: Out-of-Band

Prerequisites

Leverages: HDM2's SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The H3C UniServer R4000 Series - HBA (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.25506.13.1.2.1.1.14.1.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Network Card, FC Port (MS_HW_NETWORK)
  • Link Speed
  • Link Status
  • Device Type
  • Physical Address
  • Physical Address Type
Keywords:
hardware hdf patrol connectors
No results.