Back to the list of connectors

HP-UX - sasmgr Disk Controllers


Provides hardware SAS RAID disks status information on HP-UX systems. Requires root privileges.

Connector ID: HPUXSasMgr

This connector is superseded by:


Typical platforms: HP 9000, HP Integrity, HP SuperDome

Operating system: HP-UX


Leverages: HP-UX system commands (sasmgr, ioscan etc.)

Technology and protocols: System Commands

This connector requires advanced privileges on the managed host for the command below:

  • /opt/sas/bin/sasmgr

This connector therefore needs to run as root or you need to configure a privilege-escalation mechanism like sudo on the managed host to allow the monitoring account to run the command listed above.

Sample of /etc/sudoers to allow the above command to be run as root by the hwsagent account:

hwsagent ALL=(root) NOPASSWD: /opt/sas/bin/sasmgr



hws HOSTNAME -t hp -f HPUXSasMgr --ssh -u USER --sudo-command-list /opt/sas/bin/sasmgr


- host:
    hostname: <HOSTNAME> # Change with actual host name
    type: hp
  selectedConnectors: [ HPUXSasMgr ] # Optional, to load only this connector
    username: <USERNAME> # Change with actual credentials
    password: <PASSWORD> # Encrypted using hws-encrypt
    useSudo: true
    useSudoCommands: [ "/opt/sas/bin/sasmgr" ]

Connector Activation Criteria

The HP-UX - sasmgr Disk Controllers connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • Operating System is HP-UX
  • The command below succeeds on the monitored host
    • Command: /bin/ls /opt/sas/bin/sasmgr
    • Output contains: sasmgr$ (regex)
  • The command below succeeds on the monitored host
    • Command: /bin/sh %EmbeddedFile(1)%
    • Output contains: Info for PHY ID (regex)


Type Collected Metrics Specific Attributes (Labels)
Disk Controller
  • hw.status{hw.type="disk_controller",state="ok|degraded|failed"}
  • hw.status{hw.type="disk_controller",state="present"}
  • firmware_version
  • model
  • vendor
Logical Disk, RAID
  • hw.logical_disk.limit
  • hw.status{hw.type="logical_disk",state="ok|degraded|failed"}
  • hw.status{hw.type="logical_disk",state="present"}
  • raid_level
Physical Disk
  • hw.status{hw.type="physical_disk",state="ok|degraded|failed"}
  • hw.status{hw.type="physical_disk",state="present"}
    No results.