|
|
|
SMcli Settings
|
Enables you to configure the SMcli settings.
|
Add a Connection to a Storage Subsystem
|
Enables you to add a subsystem to the monitored environment.
|
Reporting
|
Generates activity reports for the monitored devices.
|
Reporting > Subsystems Activity...
|
Generates a report on the subsystems activity.
|
Reporting > Controllers Activity...
|
Generates a report on the controllers activity.
|
Reporting > Logical Drives Activity...
|
Generates a report on the logical drives activity.
|
Reporting > Logical Drives Mapping Table...
|
Generates a report listing mapped and unmapped logical drives.
|
Reporting > Per Host Storage Allocation
|
Generates a report on the volume of storage allocated to each monitored host.
|
Reporting > Per LUN Storage Allocation
|
Generates a report on the volume of storage allocated to each monitored LUN.
|
Search WWN
|
Enables you to find any component based on its complete or partial World Wide Name.
|
KM Settings
|
Displays all the command options for different monitoring settings.
|
KM Settings > Java Settings
|
Enables you to define which Java instance is to be used by the KM.
|
KM Settings > Discovery Interval
|
Enables you to customize the discovery cycle. By default, discovery is performed every hour.
|
KM Settings > Polling Interval
|
Enables you to customize the polling cycle. By default, the polling interval is done every 2 minutes.
|
KM Settings > Alert Actions
|
Enables you to select the Alert Actions (different methods of notification) to be executed by the KM when a parameter breaches its threshold.
|
KM Settings > Additional Settings
|
Enables you to perform additional settings such as restoring device monitoring and enabling/disabling debug mode.
|
KM Settings > Additional Settings > Threshold Mechanism Selection
|
Allows you to select the threshold mechanism:
| • | Automatic (by default): the KM determines the mode of threshold management best suited to the system. The different modes are: |
| • | Tuning: the KM uses the internal PATROL mechanism to set thresholds |
| • | Event Management: the KM automatically sets thresholds through the Event Management |
| • | No thresholds: the KM does not set any thresholds and lets you specify them manually. |
|
KM Settings > Additional Settings > Restore Monitoring
|
Brings up the "Restore Monitoring" wizard to restore one or several objects after their monitoring has been stopped.
|
KM Settings > Debug
|
Activates or deactivates the debug mode. The debug Mode displays debug messages in the PATROL System Output Window or saves it in a file if you enter the file path.
|
Trigger a KM Discovery
|
Enables you to trigger a forced discovery and rediscover the devices of the monitored system.
|
Reinitialize KM
|
Triggers a complete re-initialization of the KM. Customized settings are lost unless specified otherwise in the Reinitialize wizard.
|
About
|
States basic product information and BMC Software support contact information.
|
