Back to the list of connectors

Cisco UCS C-Series CIMC (SNMP)

Connector file name: MS_HW_CiscoUCSCIMC.hdf

Description

This connector provides hardware monitoring for the Cisco C-Series Servers with CIMC cards via SNMP

Target

Typical platform: Cisco UCS

Operating system: Out-of-Band

Prerequisites

Relies on: Cisco CIMC

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Cisco UCS C-Series CIMC (SNMP) connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.9.9.719.1.41.9 must return a value in the same subtree
  • An SNMP Get on the OID 1.3.6.1.2.1.1.1.0 must return a value that matches with the UCS C regular expression

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Serial Number
  • Vendor
  • Power Consumption
  • Status
Disk Controller (MS_HW_DISKCONTROLLER)
  • Firmware Version
  • Model
  • Serial Number
  • Vendor
  • Controller Status
Battery (MS_HW_BATTERY)
  • Model
  • Vendor
  • Status
Processor (MS_HW_CPU)
  • Maximum Speed
  • Model
  • Vendor
  • Status
Fan (MS_HW_FAN)
    • Status
    Memory Module (MS_HW_MEMORY)
    • Additional Information 1
    • Additional Information 3
    • Serial Number
    • Size
    • Type
    • Status
    Other Device (MS_HW_OTHERDEVICE)
    • Type
    • Status
    Physical Disk (MS_HW_PHYSICALDISK)
    • Model
    • Serial Number
    • Size
    • Vendor
    • Status
    Power Supply (MS_HW_POWERSUPPLY)
    • Additional Information 1
    • Additional Information 2
    • Additional Information 3
    • Status
    Keywords:
    hardware hdf patrol connectors