Back to the list of connectors

Cisco UCS S-Series CIMC (SNMP)

Connector file name: MS_HW_CiscoUCSSCIMC.hdf

Description

This connector provides hardware monitoring for the Cisco S-Series Servers with CIMC cards via SNMP.

Target

Typical platform: Cisco UCS

Operating system: Out-of-Band

Prerequisites

Relies on: Cisco S-Series CIMC

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Cisco UCS S-Series CIMC (SNMP) connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.9.9.719.1.41.9 must return a value in the same subtree
  • An SNMP Get on the OID 1.3.6.1.2.1.1.1.0 must return a value that matches with the UCS S regular expression

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Vendor
    Disk Controller (MS_HW_DISKCONTROLLER)
    • Firmware Version
    • Model
    • Serial Number
    • Vendor
    • Controller Status
    Battery (MS_HW_BATTERY)
    • Model
    • Vendor
    • Status
    Blade (MS_HW_BLADE)
    • Blade Model
    • Serial Number
    • Vendor
    • Status
    Processor (MS_HW_CPU)
    • Maximum Speed
    • Model
    • Vendor
    • Status
    Fan (MS_HW_FAN)
      • Status
      Memory Module (MS_HW_MEMORY)
      • Additional Information 1
      • Additional Information 2
      • Model
      • Serial Number
      • Size
      • Type
      • Vendor
      • Status
      Other Device (MS_HW_OTHERDEVICE)
      • Type
      • Status
      Physical Disk (MS_HW_PHYSICALDISK)
      • Model
      • Serial Number
      • Size
      • Vendor
      • Status
      Power Supply (MS_HW_POWERSUPPLY)
      • Additional Information 1
      • Additional Information 2
      • Additional Information 3
      • Status
      Keywords:
      hardware hdf patrol connectors