Back to the list of connectors

Dell MX7000 Chassis

Connector file name: MS_HW_DellMXCMC.hdf

Description

Provides environmental information (temperatures, fans and power supplies) on Dell Blade servers through the Management Module

Target

Typical platform: Dell MX7000 Chassis

Operating system: Out-of-Band

Prerequisites

Relies on: Dell MX7000 Management Module

Technology and protocols: SSH

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Dell MX7000 Chassis connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • SSH is enabled on the monitored host
  • The monitored host must send $
  • The connector sends quit[Return]logout[Return]exit[Return]
  • The captured output contains Welcome to the RACADM Shell (regex)

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Serial Number
  • Type
  • Power Consumption
  • Status
Disk Controller (MS_HW_DISKCONTROLLER)
  • Model
  • Controller Status
Battery (MS_HW_BATTERY)
    • Status
    Blade (MS_HW_BLADE)
    • Blade Model
    • Blade Name
    • Power State
    • Status
    Fan (MS_HW_FAN)
    • Alarm Threshold
    • Fan Type/Location
    • Warning Threshold
    • Speed
    • Status
    Logical Disk, RAID (MS_HW_LOGICALDISK)
    • RAID Level
    • Size
    • Status
    Other Device (MS_HW_OTHERDEVICE)
    • Device Type
    • Status
    Physical Disk (MS_HW_PHYSICALDISK)
    • Serial Number
    • Size
    • Vendor
    • Predicted Failure
    • Status
    Power Supply (MS_HW_POWERSUPPLY)
      • Status
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Alarm Threshold
      • Sensor Type/Location
      • Warning Threshold
      • Status
      • Temperature
      Keywords:
      hardware hdf patrol connectors