Back to the list of connectors

Windows - DiskPart

Connector file name: MS_HW_DiskPart.hdf

Description

Discovers and monitors the logical disks in a Microsoft Windows system through the DISKPART.EXE utility, notably the software RAID volumes.

Target

Typical platform: Any system

Operating system: Microsoft Windows

Prerequisites

Relies on: The DISKPART.EXE command-line utility

Technology and protocols: System Commands

This connector is not available for remote hosts (it is applicable to the local host only).

Connector Activation Criteria

The Windows - DiskPart connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • Operating System is Microsoft Windows
  • The command below succeeds on the monitored host
    • Command: CHCP 437&&DISKPART.EXE /S %EmbeddedFile(3)%
    • Output contains: Leaving DiskPart (regex)

Monitors

Object Type Discovered Properties Collected Parameters
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • RAID Level
  • Size
  • Status
Keywords:
hardware hdf patrol connectors