Back to the list of connectors

EMC Isilon Cluster (REST)

Connector file name: MS_HW_EMCIsilonREST.hdf

Description

This connector discovers the status of an EMC Isilon Storage Cluster, as well as the various environment sensors (temperatures, fans, power supplies, etc.). Requires EMC Isilon (v8) or later.

Target

Typical platform: EMC Isilon

Operating system: Storage System

Prerequisites

Relies on:

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The EMC Isilon Cluster (REST) connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • The HTTP Request below to the managed host succeeds:
    • GET /platform/3/cluster/version
    • The response body contains: Isilon OneFS (regex)

    Monitors

    Object Type Discovered Properties Collected Parameters
    Enclosure (MS_HW_ENCLOSURE)
    • Additional Information 1
    • Model
    • Serial Number
    • Type
    • Vendor
    • Status
    Battery (MS_HW_BATTERY)
      • Status
      Processor (MS_HW_CPU)
      • Model
      • Status
      Fan (MS_HW_FAN)
      • Alarm Threshold
      • Warning Threshold
      • Speed
      Logical Disk, RAID (MS_HW_LOGICALDISK)
      • Additional Information 1
      • Size
      • Status
      Network Card, FC Port (MS_HW_NETWORK)
        • Link Status
        • Status
        Physical Disk (MS_HW_PHYSICALDISK)
        • Model
        • Serial Number
        • Size
        • Status
        Power Supply (MS_HW_POWERSUPPLY)
        • Additional Information 1
        • Status
        Temperature Sensor (MS_HW_TEMPERATURE)
        • Alarm Threshold
        • Warning Threshold
        • Temperature
        Voltage Sensor (MS_HW_VOLTAGE)
        • Lower Threshold
        • Upper Threshold
        • Voltage
      Keywords:
      hardware hdf patrol connectors