Back to the list of connectors

HP TopTools Agent

Connector file name: MS_HW_HPTopToolsNT.hdf

Description

This connector provides hardware monitoring through the HP TopTools Agent version 5.x which supports almost all HP NetServer servers under Windows.

Target

Typical platform: HP NetServer

Operating system: Microsoft Windows

Prerequisites

Relies on: HP TopTools Agent

Technology and protocols: System Commands, WMI

This connector is not available for remote hosts (it is applicable to the local host only).

Connector Activation Criteria

The HP TopTools Agent connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • Operating System is Microsoft Windows
  • The Windows service SNMP is running
  • The Windows service hpwebsvc is running
  • The command below succeeds on the monitored host
    • Command: CSCRIPT.EXE //?
    • Output contains: Microsoft (regex)

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Type
  • Vendor
    Processor (MS_HW_CPU)
    • Maximum Speed
    • Model
    • Vendor
    • Status
    Fan (MS_HW_FAN)
    • Alarm Threshold
    • Fan Type/Location
    • Warning Threshold
    • Speed
    • Status
    Memory Module (MS_HW_MEMORY)
    • Size
    • Type
    • Status
    Power Supply (MS_HW_POWERSUPPLY)
      • Status
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Alarm Threshold
      • Sensor Type/Location
      • Warning Threshold
      • Temperature
      Voltage Sensor (MS_HW_VOLTAGE)
      • Lower Threshold
      • Upper Threshold
      • Voltage Type
      • Status
      • Voltage
      Keywords:
      hardware hdf patrol connectors