Back to the list of connectors

HP TopTools NetRaid Agent

Connector file name: MS_HW_HpNetRaidController.hdf

Description

This connector monitors the RAID disks (physical and logical) attached to an HP NetRAID controller. It uses the information provided by the HP NetRAID SNMP Sub-Agent, installed with the HP TopTools Server Agent.

Target

Typical platform: HP NetServer

Operating systems: Linux, Microsoft Windows

Prerequisites

Relies on: HP TopTools NetRaid Agent

Technology and protocols: SNMP

Connector Activation Criteria

The HP TopTools NetRaid Agent connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.16.1.1.1.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Disk Controller (MS_HW_DISKCONTROLLER)
  • BIOS Version
  • Firmware Version
  • Model
  • Vendor
    Logical Disk, RAID (MS_HW_LOGICALDISK)
    • RAID Level
    • Size
    • Status
    Physical Disk (MS_HW_PHYSICALDISK)
    • Model
    • Size
    • Vendor
    • Status
    Keywords:
    hardware hdf patrol connectors