Back to the list of connectors

StorageTek LSeries Tape Library

Connector file name: MS_HW_StorageTekLSeries.hdf

Description

This connector provides basic hardware monitoring of the StorageTek LSeries tape libraries through their built-in SNMP agent. Needs to run remotely.

Target

Typical platform: StorageTek LSeries

Operating system: Storage System

Prerequisites

Relies on: StorageTek LSeries SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The StorageTek LSeries Tape Library connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.1211.1.12.4.2.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • Additional Information 2
  • Model
  • Serial Number
  • Type
  • Vendor
  • Status
Fan (MS_HW_FAN)
  • Fan Type/Location
  • Status
Other Device (MS_HW_OTHERDEVICE)
  • Additional Label
  • Device Type
  • Status
  • Usage Count
Power Supply (MS_HW_POWERSUPPLY)
  • Power Supply Type
  • Status
Robotic (MS_HW_ROBOTICS)
  • Additional Information 1
  • Additional Information 2
  • Serial Number
  • Error Count
  • Move Count
  • Status
Tape Drive (MS_HW_TAPEDRIVE)
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Model
  • Serial Number
  • Vendor
  • Mount Count
  • Status
Temperature Sensor (MS_HW_TEMPERATURE)
  • Alarm Threshold
  • Sensor Type/Location
  • Warning Threshold
  • Temperature
Keywords:
hardware hdf patrol connectors