Back to the list of connectors

DataDirect Networks (DDN) Disk Array (SNMP)

Connector file name: MS_HW_DDN.hdf

Description

This connector discovers the enclosure and the disks of DDN (DataDirect Networks) disk arrays as well as the various environment sensors (temperatures, fans, power supplies). It relies on the SNMP protocol.

Target

Typical platform: DataDirect Networks (DDN)

Operating system: Storage System

Prerequisites

Leverages: DDN SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The DataDirect Networks (DDN) Disk Array (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.6894.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Type
  • Vendor
    Fan (MS_HW_FAN)
      • Status
      Physical Disk (MS_HW_PHYSICALDISK)
      • Vendor
      • Status
      Power Supply (MS_HW_POWERSUPPLY)
        • Status
        Temperature Sensor (MS_HW_TEMPERATURE)
        • Sensor Type/Location
        • Status
        Keywords:
        hardware hdf patrol connectors