Back to the list of connectors
Data Domain Storage Appliance (SNMP)
Connector file name: MS_HW_DataDomain.hdf
Description
This connector discovers the enclosure and the disks of Data Domain disk arrays as well as the various environment sensors (temperatures, fans, power supplies). It relies on the SNMP protocol.
Target
Typical platform: Data Domain
Operating system: Storage System
Prerequisites
Leverages: Data Domain SNMP Agent
Technology and protocols: SNMP
This connector is not available for the local host (it is applicable to remote hosts only).
Connector Activation Criteria
The Data Domain Storage Appliance (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:
- An SNMP Get-Next on the OID
1.3.6.1.4.1.19746.1
must return a value in the same subtree
Monitors
Object Type | Discovered Properties | Collected Parameters |
---|---|---|
Enclosure (MS_HW_ENCLOSURE) |
|
|
Battery (MS_HW_BATTERY) |
|
|
Fan (MS_HW_FAN) |
|
|
Logical Disk, RAID (MS_HW_LOGICALDISK) |
|
|
Physical Disk (MS_HW_PHYSICALDISK) |
|
|
Power Supply (MS_HW_POWERSUPPLY) |
|
|
Temperature Sensor (MS_HW_TEMPERATURE) |
|
|
Keywords:
hardware hdf patrol connectors
hardware hdf patrol connectors