Back to the list of connectors

Dell OpenManage Storage Manager

Connector file name: MS_HW_DellStorageManager.hdf

This connector supersedes:

Description

This connector provides Dell disk array monitoring through the Dell Storage Manager Agent which supports almost all Dell disk arrays.

Target

Typical platform: Dell PowerEdge

Operating systems: Microsoft Windows, Linux

Prerequisites

Leverages: Dell OpenManage Server Administrator

Technology and protocols: SNMP

Connector Activation Criteria

The Dell OpenManage Storage Manager connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.674.10893.1.20 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Model
  • Serial Number
  • Type
  • Vendor
  • Status
Disk Controller (MS_HW_DISKCONTROLLER)
  • Driver Version
  • Firmware Version
  • Model
  • Controller Status
Battery (MS_HW_BATTERY)
  • Model
  • Vendor
  • Status
Fan (MS_HW_FAN)
  • Additional Information 1
  • Speed
  • Status
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • RAID Level
  • Size
  • Status
Other Device (MS_HW_OTHERDEVICE)
  • Additional Information 1
  • Device Type
  • Status
Physical Disk (MS_HW_PHYSICALDISK)
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Serial Number
  • Size
  • Vendor
  • Predicted Failure
  • Status
Power Supply (MS_HW_POWERSUPPLY)
  • Additional Information 1
  • Status
Temperature Sensor (MS_HW_TEMPERATURE)
    • Status
    • Temperature
    Keywords:
    hardware hdf patrol connectors