Back to the list of connectors

Dell iDRAC - Storage

Connector file name: MS_HW_DelliDRACStorage.hdf

Description

This connector provides server storage monitoring through Dell's iDRAC Management Card for Dell servers with iDRAC7 or later.

Target

Typical platform: Dell PowerEdge

Operating system: Out-of-Band

Prerequisites

Leverages: Dell iDRAC Management Card (iDRAC7 or Later)

Technology and protocols: SNMP

Connector Activation Criteria

The Dell iDRAC - Storage connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.674.10892.5.5.1.20.130.4 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Serial Number
  • Type
  • Vendor
  • Status
Disk Controller (MS_HW_DISKCONTROLLER)
  • Driver Version
  • Firmware Version
  • Model
  • Controller Status
Battery (MS_HW_BATTERY)
  • Additional Information 1
  • Status
Fan (MS_HW_FAN)
  • Additional Information 1
  • Status
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • Additional Information 1
  • Additional Information 2
  • RAID Level
  • Size
  • Status
Other Device (MS_HW_OTHERDEVICE)
  • Additional Information 1
  • Additional Information 2
  • Device Type
  • Status
Physical Disk (MS_HW_PHYSICALDISK)
  • Additional Information 1
  • Additional Information 2
  • Serial Number
  • Size
  • Vendor
  • Status
Power Supply (MS_HW_POWERSUPPLY)
  • Additional Information 1
  • Additional Information 2
  • Status
Keywords:
hardware hdf patrol connectors