Back to the list of connectors
Windows - DiskPart
Connector file name: MS_HW_DiskPart.hdf
Description
Discovers and monitors the logical disks in a Microsoft Windows system through the DISKPART.EXE utility, notably the software RAID volumes.
Target
Typical platform: Any system
Operating system: Microsoft Windows
Prerequisites
Leverages: The DISKPART.EXE command-line utility
Technology and protocols: System Commands
This connector is not available for remote hosts (it is applicable to the local host only).
Connector Activation Criteria
The Windows - DiskPart connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:
- Operating System is Microsoft Windows
- The command below succeeds on the monitored host
- Command:
CHCP 437&&DISKPART.EXE /S %EmbeddedFile(3)%
- Output contains:
Leaving DiskPart
(regex)
- Command:
Monitors
Object Type | Discovered Properties | Collected Parameters |
---|---|---|
Logical Disk, RAID (MS_HW_LOGICALDISK) |
|
|
Keywords:
hardware hdf patrol connectors
hardware hdf patrol connectors