Back to the list of connectors
EMC uemcli (VNXe)
Connector file name: MS_HW_EMCuemcli.hdf
This connector is superseded by:
- MS_HW_EMCCelerra.hdf
- MS_HW_EMCNavisphereCLILDAP.hdf
- MS_HW_EMCNavisphereCLIGlobal.hdf
- MS_HW_EMCNavisphereCLI.hdf
Description
This connector provides hardware monitoring for EMC VNXe Storage Systems through the uemcli command line utility.
Target
Typical platform: EMC VNXe
Operating system: Storage System
Prerequisites
Leverages: uemcli
Technology and protocols: System Commands
This connector is not available for the local host (it is applicable to remote hosts only).
Connector Activation Criteria
The EMC uemcli (VNXe) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:
- Operating System is Storage System
- The command below succeeds on the agent host
- Command:
uemcli -version | more
- Output contains:
Version:
(regex)
- Command:
- The command below succeeds on the agent host
- Command:
uemcli -d %{HOSTNAME} -u %{USERNAME} -p %{PASSWORD} -sslPolicy accept /sys/general show | more
- Output contains:
Model
(regex)
- Command:
Monitors
Object Type | Discovered Properties | Collected Parameters |
---|---|---|
Enclosure (MS_HW_ENCLOSURE) |
|
|
Battery (MS_HW_BATTERY) |
|
|
Fan (MS_HW_FAN) |
|
|
Memory Module (MS_HW_MEMORY) |
|
|
Network Card, FC Port (MS_HW_NETWORK) |
|
|
Other Device (MS_HW_OTHERDEVICE) |
|
|
Physical Disk (MS_HW_PHYSICALDISK) |
|
|
Power Supply (MS_HW_POWERSUPPLY) |
|
|
Keywords:
hardware hdf patrol connectors
hardware hdf patrol connectors