Back to the list of connectors

F5 BigIP Switch

Connector file name: MS_HW_F5BigIP.hdf

This connector supersedes:

Description

This connector discovers ports and the environment for F5 BigIP Switches (F5-BIGIP-SYSTEM-MIB)

Target

Typical platform: F5 BigIP

Operating system: Network Device

Prerequisites

Leverages: F5 SNMP Agent (bigipSystem)

Technology and protocols: SNMP

Connector Activation Criteria

The F5 BigIP Switch connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.3375.2.1.3.5.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Serial Number
  • Type
  • Vendor
    Fan (MS_HW_FAN)
    • Warning Threshold
    • Speed
    • Status
    Network Card, FC Port (MS_HW_NETWORK)
    • Bandwidth
    • Physical Address
    • Physical Address Type
    • Bandwidth Utilization
    • Duplex Mode
    • Error Percent
    • Link Speed
    • Link Status
    • Received Bytes Rate
    • Received Packets Rate
    • Transmitted Bytes Rate
    • Transmitted Packets Rate
    Power Supply (MS_HW_POWERSUPPLY)
      • Status
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Warning Threshold
      • Temperature
      Keywords:
      hardware hdf patrol connectors