Back to the list of connectors

Hitachi Compute Blade Chassis

Connector file name: MS_HW_HitachiComputeBlade.hdf

Description

This connector provides hardware monitoring for the Hitachi Compute Blade series chassis through the Hitachi Compute Blades Management Module

Target

Typical platform: Hitachi Compute Blade

Operating system: Out-of-Band

Prerequisites

Leverages: Hitachi Compute Blade Chassis Management Module

Technology and protocols: SNMP

Connector Activation Criteria

The Hitachi Compute Blade Chassis connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.116.5.52.1.1.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • BIOS Version
  • Model
  • Serial Number
  • Type
  • Vendor
  • Power Consumption
Blade (MS_HW_BLADE)
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Blade Model
  • Serial Number
  • Power State
  • Status
Fan (MS_HW_FAN)
  • Fan Type/Location
  • Status
Other Device (MS_HW_OTHERDEVICE)
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Device Type
  • Status
Power Supply (MS_HW_POWERSUPPLY)
    • Status
    Temperature Sensor (MS_HW_TEMPERATURE)
      • Status
      • Temperature
      Voltage Sensor (MS_HW_VOLTAGE)
        • Status
        • Voltage
        Keywords:
        hardware hdf patrol connectors