Back to the list of connectors

Hitachi HNAS (SNMP)

Connector file name: MS_HW_HitachiHNAS.hdf

Description

This connector discovers the status of Hitachi HNAS Processors, CSW, Cache, SM, Power Supplies, Batteries, Fans, Physical Disks and Environment.

Target

Typical platform: Hitachi HNAS

Operating system: Storage System

Prerequisites

Leverages: Hitachi HNAS SNMP Agent

Technology and protocols: SNMP

Connector Activation Criteria

The Hitachi HNAS (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.11096.6.1.1.1.2 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • Model
  • Serial Number
  • Type
  • Vendor
  • Status
Battery (MS_HW_BATTERY)
    • Status
    Fan (MS_HW_FAN)
      • Speed
      • Status
      Logical Disk, RAID (MS_HW_LOGICALDISK)
      • Additional Information 1
      • Additional Information 2
      • Additional Information 3
      • RAID Level
      • Size
      • Status
      Network Card, FC Port (MS_HW_NETWORK)
        • Error Percent
        • Link Speed
        • Link Status
        • Received Packets Rate
        • Transmitted Packets Rate
        Physical Disk (MS_HW_PHYSICALDISK)
        • Size
        • Vendor
        • Status
        Power Supply (MS_HW_POWERSUPPLY)
          • Status
          Temperature Sensor (MS_HW_TEMPERATURE)
            • Status
            • Temperature
            Keywords:
            hardware hdf patrol connectors