Back to the list of connectors

Juniper Switch

Connector file name: MS_HW_Juniper.hdf

This connector supersedes:

Description

This connector discovers the enclosure and Ethernet ports of a system equipped with an MIB-2 standard SNMP Agent.

Target

Typical platform: Juniper Network Switch

Operating system: Network Device

Prerequisites

Leverages: MIB-2 Standard SNMP Agent

Technology and protocols: SNMP

Connector Activation Criteria

The Juniper Switch connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.2636.3.1.15.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • BIOS Version
  • Model
  • Serial Number
  • Type
  • Vendor
    Blade (MS_HW_BLADE)
    • Additional Information 1
    • Additional Information 2
    • Additional Information 3
    • Blade Model
    • Serial Number
    • Status
    Fan (MS_HW_FAN)
    • Additional Information 1
    • Additional Information 2
    • Additional Information 3
    • Status
    Network Card, FC Port (MS_HW_NETWORK)
    • Device Type
    • Physical Address
    • Physical Address Type
    • Bandwidth Utilization
    • Error Percent
    • Link Speed
    • Link Status
    • Received Bytes Rate
    • Received Packets Rate
    • Status
    • Transmitted Bytes Rate
    • Transmitted Packets Rate
    Other Device (MS_HW_OTHERDEVICE)
    • Additional Information 1
    • Additional Information 2
    • Additional Information 3
    • Device Type
    • Status
    Power Supply (MS_HW_POWERSUPPLY)
    • Additional Information 1
    • Additional Information 2
    • Additional Information 3
    • Status
    Keywords:
    hardware hdf patrol connectors