Back to the list of connectors

LSI Logic - LsiUtil - RAID (Windows)

Connector file name: MS_HW_LSIUtilWindows.hdf

This connector is superseded by:

This connector supersedes:

Description

Gives information about physical disks and volumes of LSI Logic SAS RAID controllers through the lsiutil utility.

Target

Typical platform: Any system with LSI lsiutil

Operating system: Microsoft Windows

Prerequisites

Leverages: lsiutil

Technology and protocols: System Commands

This connector is not available for remote hosts (it is applicable to the local host only).

Connector Activation Criteria

The LSI Logic - LsiUtil - RAID (Windows) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • Operating System is Microsoft Windows
  • The command below succeeds on the monitored host
    • Command: for %i in (1,2,3,4,5,6,7,8,9) do lsiutil.exe -p%i -a 1,2,0 21
    • Output contains: ^PhysDisk [0-9] (regex)

Monitors

Object Type Discovered Properties Collected Parameters
Disk Controller (MS_HW_DISKCONTROLLER)
  • Firmware Version
  • Model
  • Vendor
    Logical Disk, RAID (MS_HW_LOGICALDISK)
    • RAID Level
    • Size
    • Status
    Physical Disk (MS_HW_PHYSICALDISK)
    • Size
    • Vendor
    • Status
    Keywords:
    hardware hdf patrol connectors