Back to the list of connectors
Lenovo IMM (SNMP)
Connector file name: MS_HW_LenovoIMM.hdf
This connector supersedes:
Description
This connector provides hardware monitoring through Lenovo's IMM management card. The connector also usually works with the last generation of IBM xSeries servers (m5).
Target
Typical platform: Lenovo
Operating system: Out-of-Band
Prerequisites
Leverages: Lenovo IMM's SNMP Service
Technology and protocols: SNMP
Connector Activation Criteria
The Lenovo IMM (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:
- An SNMP Get-Next on the OID
1.3.6.1.4.1.2.3.51.3.1
must return a value in the same subtree
Monitors
Object Type | Discovered Properties | Collected Parameters |
---|---|---|
Enclosure (MS_HW_ENCLOSURE) |
|
|
Disk Controller (MS_HW_DISKCONTROLLER) |
|
|
Battery (MS_HW_BATTERY) |
|
|
Processor (MS_HW_CPU) |
|
|
Fan (MS_HW_FAN) |
|
|
LED (MS_HW_LED) |
|
|
Logical Disk, RAID (MS_HW_LOGICALDISK) |
|
|
Memory Module (MS_HW_MEMORY) |
|
|
Physical Disk (MS_HW_PHYSICALDISK) |
|
|
Power Supply (MS_HW_POWERSUPPLY) |
|
|
Temperature Sensor (MS_HW_TEMPERATURE) |
|
|
Voltage Sensor (MS_HW_VOLTAGE) |
|
|
Keywords:
hardware hdf patrol connectors
hardware hdf patrol connectors