Back to the list of connectors

Quantum (ADIC) Enterprise Level Tape Libraries

Connector file name: MS_HW_QuantumTapeLibraryi6000.hdf

This connector supersedes:

Description

This connector provides hardware monitoring through the Quantum Scalar's SNMP interface. It is primarily designed for the i2000 and i6000 libraries.

Target

Typical platforms: Quantum Scalar i2000, Quantum Scalar i6000

Operating system: Storage System

Prerequisites

Leverages: Quantum SNMP Agent (ADIC-MANAGEMENT-MIB)

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Quantum (ADIC) Enterprise Level Tape Libraries connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.3764.1.1.200.20.80.110.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • BIOS Version
  • Model
  • Serial Number
  • Type
  • Vendor
  • Status
Fan (MS_HW_FAN)
  • Alarm Threshold
  • Warning Threshold
  • Speed
  • Status
Other Device (MS_HW_OTHERDEVICE)
  • Device Type
  • Status
Power Supply (MS_HW_POWERSUPPLY)
    • Status
    Robotic (MS_HW_ROBOTICS)
      • Status
      Tape Drive (MS_HW_TAPEDRIVE)
      • Additional Information 1
      • Model
      • Serial Number
      • Vendor
      • Error Count
      • Mount Count
      • Needs Cleaning
      • Status
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Alarm Threshold
      • Warning Threshold
      • Status
      • Temperature
      Voltage Sensor (MS_HW_VOLTAGE)
      • Lower Threshold
      • Upper Threshold
      • Status
      • Voltage
      Keywords:
      hardware hdf patrol connectors