Back to the list of connectors

Fujitsu-Siemens Serverview - Agent (v8 or higher)

Connector file name: MS_HW_ServerviewNTv8.hdf

This connector supersedes:

Description

This connector provides hardware monitoring through the Fujitsu-Siemens Serverview Agent which supports almost all Fujitsu-Siemens PRIMERGY servers.

Target

Typical platform: Fujitsu-Siemens PRIMERGY

Operating systems: Microsoft Windows, Linux

Prerequisites

Leverages: Fujitsu-Siemens Serveview Agent

Technology and protocols: SNMP

Connector Activation Criteria

The Fujitsu-Siemens Serverview - Agent (v8 or higher) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get on the OID 1.3.6.1.4.1.231.2.10.2.2.10.1.3.0 must return a value that matches with the ^\([1-9][0-9]\)\|\([89]\)\. regular expression

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Serial Number
  • Type
  • Vendor
  • Intrusion Status
Battery (MS_HW_BATTERY)
    • Status
    Processor (MS_HW_CPU)
    • Maximum Speed
    • Model
    • Vendor
    • Status
    Fan (MS_HW_FAN)
      • Speed
      • Status
      Memory Module (MS_HW_MEMORY)
      • Additional Information 1
      • Size
      • Type
      • Status
      Other Device (MS_HW_OTHERDEVICE)
      • Device Type
      • Status
      Physical Disk (MS_HW_PHYSICALDISK)
        • Status
        Power Supply (MS_HW_POWERSUPPLY)
          • Status
          Temperature Sensor (MS_HW_TEMPERATURE)
          • Alarm Threshold
          • Warning Threshold
          • Status
          • Temperature
          Voltage Sensor (MS_HW_VOLTAGE)
          • Lower Threshold
          • Upper Threshold
          • Status
          • Voltage
          Keywords:
          hardware hdf patrol connectors