Back to the list of connectors
Oracle/Sun Enterprise Mx000 (XSCF)
Connector file name: MS_HW_SunXscf.hdf
Description
Gives environmental information (temperatures, fans, etc.) and boards status on SPARC Enterprise M4000, M5000, M8000 and M9000 servers.
Target
Typical platform: Oracle/Sun Enterprise Mx000
Operating systems: Oracle Solaris, Out-of-Band
Prerequisites
Leverages: Sun XSCF utilities installed on the System Controller
Technology and protocols: System Commands
This connector is not available for the local host (it is applicable to remote hosts only).
Connector Activation Criteria
The Oracle/Sun Enterprise Mx000 (XSCF) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:
- The command below succeeds on the monitored host
- Command:
showhardconf
- Output contains:
Serial:
(regex)
- Command:
Monitors
Object Type | Discovered Properties | Collected Parameters |
---|---|---|
Enclosure (MS_HW_ENCLOSURE) |
|
|
Processor (MS_HW_CPU) |
|
|
Fan (MS_HW_FAN) |
|
|
Memory Module (MS_HW_MEMORY) |
|
|
Other Device (MS_HW_OTHERDEVICE) |
|
|
Power Supply (MS_HW_POWERSUPPLY) |
|
|
Temperature Sensor (MS_HW_TEMPERATURE) |
|
|
Voltage Sensor (MS_HW_VOLTAGE) |
|
|
Keywords:
hardware hdf patrol connectors
hardware hdf patrol connectors