Back to the list of connectors

SuperMicro REST

Connector file name: MS_HW_SuperMicro.hdf

Description

This connector provides hardware monitoring for SuperMicro Systems via Redfish REST API. It monitors the Enclosure and Physical Disks as well as the various environment sensors (CPUs, temperatures, fans, power supplies, Memory and Network cards).

Target

Typical platform: SuperMicro

Operating system: Out-of-Band

Prerequisites

Requires KM Version: 10.2.00 or greater

Leverages:

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The SuperMicro REST connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The KM is in version 10.2.00 or greater
  • The HTTP Request below to the managed host succeeds:
    • GET /redfish/v1/Systems/1
    • The response body contains: Supermicro (regex)

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Serial Number
  • Type
  • Vendor
  • Status
Processor (MS_HW_CPU)
  • Maximum Speed
  • Model
  • Vendor
  • Status
Fan (MS_HW_FAN)
  • Alarm Threshold
  • Warning Threshold
  • Speed
  • Speed Percent
  • Status
Memory Module (MS_HW_MEMORY)
  • Model
  • Serial Number
  • Size
  • Type
  • Vendor
  • Status
Network Card, FC Port (MS_HW_NETWORK)
  • Physical Address
  • Link Speed
  • Link Status
  • Status
Physical Disk (MS_HW_PHYSICALDISK)
  • Model
  • Vendor
  • Status
Power Supply (MS_HW_POWERSUPPLY)
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Power (Nominal)
  • Power Supply Type
  • Status
Temperature Sensor (MS_HW_TEMPERATURE)
    • Status
    • Temperature
    Voltage Sensor (MS_HW_VOLTAGE)
      • Status
      • Voltage
      Keywords:
      hardware hdf patrol connectors