Back to the list of connectors

VMware ESXi 3.x

Connector file name: MS_HW_VMwareESXi.hdf

This connector is superseded by:

This connector supersedes:

Description

This connector provides hardware monitoring through the VMware ESXi implementation of SMASH, through the WBEM protocol.

Target

Typical platform: VMware ESXi

Operating systems: Out-of-Band, Linux

Prerequisites

Leverages: WBEM

Technology and protocols: WBEM

Connector Activation Criteria

The VMware ESXi 3.x connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The WBEM query below to the managed host succeeds:
    • Namespace: root/cimv2
    • WQL Query: SELECT MajorVersion FROM VMware_HypervisorSoftwareIdentity
    • Result contains: ^3 (regex)

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Serial Number
  • Type
  • Vendor
  • Power Consumption
Battery (MS_HW_BATTERY)
    • Status
    Processor (MS_HW_CPU)
    • Maximum Speed
    • Model
    • Status
    Fan (MS_HW_FAN)
    • Alarm Threshold
    • Speed Percent Alarm Threshold
    • Speed
    • Speed Percent
    • Status
    Memory Module (MS_HW_MEMORY)
      • Status
      Network Card, FC Port (MS_HW_NETWORK)
      • Device Type
      • Physical Address
      • Physical Address Type
      • Duplex Mode
      • Link Speed
      • Link Status
      • Status
      Power Supply (MS_HW_POWERSUPPLY)
        • Status
        Temperature Sensor (MS_HW_TEMPERATURE)
        • Alarm Threshold
        • Warning Threshold
        • Status
        • Temperature
        Voltage Sensor (MS_HW_VOLTAGE)
        • Lower Threshold
        • Upper Threshold
        • Status
        • Voltage
        Keywords:
        hardware hdf patrol connectors