HC-602-KM: Sun/Oracle ILOM (SNMP) - Include LED Status

July 25, 2017
Patch for Hardware Sentry KM for PATROL - Version(s) 1.8.02, 1.9.00, 1.9.50, 1.9.60

This patch is replaced with !


Patch content

Connector for Oracle/Sun ILOM - SNMP

Should you install this patch?

Install this patch if you are monitoring Oracle/SUN servers via their ILOM Card.

What does it fix?

  • Faults shown through an LED will now generate an event; for example, when a Fault or Service LED is ON for unplugged power supplies.
  • The separate /SYS/IOCFG enclosure, which was created on some systems, has been removed.

How to install the patch?

  1. Copy the following file to the $PATROL_HOME/lib/MS_HW_hdf or %PATROL_HOME%\lib\MS_HW_hdf directory on the server where the PATROL Agent runs:
    • MS_HW_SunILOMSNMP.hdf
  2. Re-initialize Hardware Sentry for the patch to take effect. Nothing needs to be installed on Console systems.