Back to the list of connectors

Oracle Hardware Management Agent

Connector file name: MS_HW_SunHwMon.hdf

This connector supersedes:

Description

This connector provides hardware monitoring through the Oracle Hardware Management Pack which is pre-installed with Solaris and can be installed on Linux / Windows.

Target

Typical platform: Oracle/Sun

Operating systems: Microsoft Windows, Linux, Oracle Solaris

Prerequisites

Relies on: Oracle Hardware Management Pack

Technology and protocols: SNMP

Connector Activation Criteria

The Oracle Hardware Management Agent connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.42.2.2.6.1.1.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • Additional Information 2
  • BIOS Version
  • Model
  • Serial Number
  • Type
  • Vendor
  • Power Consumption
  • Status
Disk Controller (MS_HW_DISKCONTROLLER)
  • Firmware Version
  • Serial Number
  • Vendor
  • Controller Status
Processor (MS_HW_CPU)
  • Model
  • Status
Fan (MS_HW_FAN)
    • Speed
    • Status
    LED (MS_HW_LED)
    • Status When Blinking
    • Status When Off
    • Status When On
    • Status
    Logical Disk, RAID (MS_HW_LOGICALDISK)
    • RAID Level
    • Size
    • Status
    Memory Module (MS_HW_MEMORY)
    • Model
    • Size
    • Status
    Other Device (MS_HW_OTHERDEVICE)
    • Device Type
    • Status
    Physical Disk (MS_HW_PHYSICALDISK)
    • Additional Information 1
    • Additional Information 2
    • Model
    • Serial Number
    • Size
    • Type
    • Vendor
    • Status
    Power Supply (MS_HW_POWERSUPPLY)
    • Type
    • Status
    Temperature Sensor (MS_HW_TEMPERATURE)
      • Status
      • Temperature
      Voltage Sensor (MS_HW_VOLTAGE)
        • Status
        • Voltage